F001 Series
90-Degree angle flow switch 01
The F001 is a precision-machined, piston-type flow switch that provides unsurpassed durability and reliability. Its all brass or 316 stainless steel body is rated up to 1000 PSIG and features ¼” NPT inlet/outlet ports with a maximum viscosity of 500 SSU. In addition, the factory-calibrated flow switch settings range from 0.10 to 1.5 GPM in water.
Operating Principle
A spring-loaded magnetic piston inside the pressure body bore is displaced by flow through the ports and actuates a hermetically-sealed reed switch within a separate chamber inside the pressure body. As the flow decreases, the spring's recoil deactuates the switch.
-
Features
-
Electrical
-
Environmental
-
Applications
-
Specifications
-
Downloads
- One Moving Part
- Broad Media Capability
- Inherently Reliable
- No Bellows, Diaphragms or Mechanical Linkages to Wear, Bind or Cause In-Service Problems
Standard Switch Type: SPST 50 VA (NO or NC)
Optional Switch Type: SPST 100 VA (NO or NC)
Process Temperature: -40º to +300º F (-40º to +148.9º C)
Process Pressure: 1,000 PSIG (68.9 bar)
Maximum Viscosity: 500 SSU
Available Flow Set Points: 0.10 to 1.5 GPM (Water)
- Water & Wastewater
- Beverage Flow
- Lubricant Flow
- Coolant Flow
| F001 | ¼" NPT | BRASS | -60º TO +200º F | 1,000 PSIG | SPST 50 VA | NORMALLY-OPEN | 0.10 - 1.5 GPM |
| F001 | ¼" NPT | Brass | -60º to +200º F | 1,000 PSIG | SPST 50 VA | Normally-Closed | 0.10 - 1.5 GPM |
| F001 | ¼" NPT | 316 Stainless Steel | -60º to +200º F | 1,000 PSIG | SPST 50 VA | Normally-Open | 0.10 - 1.5 GPM |
| F001 | ¼" NPT | 316 Stainless Steel | -60º to +200º F | 1,000 PSIG | SPST 50 VA | Normally-Closed | 0.10 - 1.5 GPM |
Accessories
Related Articles
Do you want personal advice for your specific control process?
Contact us directly or reach out to your local AMETEK Level Measurement Solutions representative!






